Arcoweld Flux Cored Wire - ArcoCrush Hardfacing Cr28-SS FCAW 15kg Spool - 1.6mm
Classification AS/NZS 2576-2005, 2360-B7
Arcoweld – ArcoCrush Cr32-SS FCAW Hardfacing Wire 15kg Spool – 1.6mm
Flux Cored Wire, Self Shielded
Classification: AS/NZS 2576-2005, 2360-B7
Part No: ACR-CR32SS-1.6-SP15
ArcoCrush is a family of alloys tailored to meet the aggressive applications of Australian Industries wear management.
ArcoCrush Cr32 is a cored self-shielded wire manufactured from high grade ferro-alloy additives and manufactured to exact formulation providing a rich balance and blend of carbide fractions.
The weld deposit contains high fractions of chromium carbides and eutectic carbides in an austenitic matrix. Offering increased abrasion resistance over traditional chromium carbide formulations, the weld deposit is best limited to two-layer applications, however, if impact loading is low 3 layers is possible.
This versatile alloy performs exceptionally well in both fine and coarse abrasion providing armoured protection of components subject to severe abrasion and low-medium impact.
Crusher & hammers, coal pulveriser mill rolls & tables, agricultural tillage points, mining equipment, earthmoving equipment, (bucket lips, rippers), brick industry components, pump impellers, augers, slurry pipework cladding, wearplate cladding.
Post weld relief checking is normal. Best limited to two (2) layers.
Gas shielding is not required, torch electrode positive polarity (DCEP).
|Unit Of Measure||ea|