Arcoweld Solid Wire - ArcoBrite Ti-12 Titanium GTAW / GMAW
Arcoweld – Ti-12 Titanium GTAW / GMAW
Solid wire, Titanium
- TIG Diameter 1.6mm 2.5kg pack - Part No: ABR-TI12-1.6-P2.5
- TIG Diameter 2.4mm 2.5kg pack - Part No: ABR-TI12-2.4-P2.5
- TIG Diameter 3.2mm 2.5kg pack - Part No: ABR-TI12-3.2-P2.5
- MIG Diameter 1.2mm 15kg spool - Part No: ABR-TI12-1.2-SP10
ArcoBrite is a Family of Exotic welding wires available in flux core & solid – FCAW/GMAW/GTAW
ArcoBrite ERTi-2 is a solid welding wire for GTAW & GMAW welding of commercially pure Titanium, having similar chemistry to Ti-1 with higher corrosion resistance and toughness Ti-2 replaces Ti-1 on most occasions.
Titanium grade 2 is readily weldable by GMAW and GTAW processes. There is no requirement of preheat & post weld heat treatment. In handling of Titanium, it is recommended to avoid contamination avoiding contact with oily skin by using clean gloves, the area immediately surrounding the welds must be cleaned with fine abasives, solvent cleaning or pickling with a mixture of nitric and hydrofluoric acids.
Trailing gas shields must allow gas coverage of all areas above 450°C to prevent heavy oxidation during cooling. The gas shield must be low in hydrogen, oxygen and nitrogen, all of which readily dissolve in titanium and cause embrittlement.
10kg spools are ideally used for cold feed Tig applications.
|Unit Of Measure||ea|