Bohler Flux-cored Wire - AVESTA FCW 308L/MVR-PW - 1.2mm
15KG, 1.2mm Diameter
BOHLER WELDING - Avesta FCW 308L/MVR-PW - 1.2mm
Flux-cored wire, high-alloyed, austenitic stainless
Part No: BOH-E308LT1-4-1.2-15746
Rutile flux-cored wire of T 19 9 L P / E308LT1 type designed for welding 1.4307 / 304L type stainless steels with good corrosion resistance under fairly severe conditions, e.g. in oxidizing acids and cold or dilute reducing acids. Also suitable for welding steels that are stabilized with titanium or niobium, such as 1.4541 / 321, 1.4878 / 321H and 1.4550 / 347 in cases where the construction will be operating at temperatures below 400°C. For higher temperatures, a niobium-stabilized wire such as BÖHLER SAS 2 PW-FD (FOXcore 347- T1) is required. The scaling temperature is approximately 850°C in air.
Avesta FCW 308L/MVR-PW has a stronger arc and a faster freezing slag compared to Avesta FCW-2D 308L/MVR (FOXcore 308L-T0 DG). It is designed for all-round welding and can be used in all positions without changing the parameter settings. Very good slag detachability and almost no spatter formation. Due to the fast freezing rutile slag, the weldability is excellent also in the vertical up and overhead positions.
1.4301 X5CrNi18-10, 1.4306 X2CrNi19-11, 1.4307 X2CrNi18-9, 1.4311 X2CrNiN18-9,
1.4312 GX10CrNi18-8, 1.4541 X6CrNiTi18-10, 1.4546 X5CrNiNb18-10, 1.4550 X6CrNiNb18-10
UNS S30400, S30403, S30453, S32100, S34700 AISI 304, 304L, 304LN, 302, 321, 347
|Unit Of Measure||ea|