Bohler Flux-cored Wire - FOXCORE 316L-T1 FCAW - 1.2mm
15KG, 1.2mm Diameter
Bohler Welding – FOXCORE 316L-T1 FCAW - 1.2mm
Flux-cored wire, high-alloyed, austenitic stainless
Part No: BOH-E316LT1-4-1.2-57555
Rutile flux-cored wire of T 19 12 3 L P / E316LT1 type designed for welding 1.4404, 1.4432 / 316L type stainless steels with good resistance to general, pitting and intergranular corrosion in chloride containing environments. Intended for severe service conditions, e.g. in dilute hot acids. Also suitable for welding steels that are stabilized with titanium or niobium, such as 1.4571 / 316Ti for service temperatures not exceeding 400°C. For higher temperatures a niobium-stabilized consumable such as FOXcore 318-T1 is required. The scaling temperature is approximately 850°C in air. FOXcore 316L-T1 has a stronger arc and a faster freezing slag as compared to FOXcore 316L-T0 DG. It is designed for all-round welding and can be used in all positions without changing the parameter settings. Very good slag detachability and almost no spatter formation. Due to the fast freezing rutile slag, the weldability is excellent also in the vertical-up and overhead positions. The wide arc ensures even penetration and side-wall fusion to prevent lack of fusion. Suitable for service temperatures from –120°C to 400°C. For flat and horizontal welding positions, FOXcore 316L-T0 DG may be preferred.
1.4401 X5CrNiMo17-12-2, 1.4404 X2CrNiMo17-12-2, 1.4409 GX2CrNiMo19-11-2, 1.4432 X2CrNiMo17-12-3, 1.4429 X2CrNiMoN17-12-3, 1.4435 X2CrNiMo18-14-3, 1.4436 X3CrNiMo17-12-3, 1.4571 X6CrNiMoTi17-12-2 , 1.4580 X6CrNiMoNb17-12-2, 1.4583 X10CrNiMoNb18-12 UNS S31600, S31603, S31635, S31640, S31653; AISI 316L, 316Ti, 316Cb
|Unit Of Measure||ea|